Sunnen Dial Bore Gages


•Sunnen Dial Bore Gages and Setting Fixtures are available to cover diameters from .054” to 6” (13,71 mm to 152,4 mm), optional to 12” diameters (309 mm).
•Dial Bore Gage models are available with readouts in .0001” or .0005” increments (metric versions 0,002 mm or 0,010 increments)
•Digital models available with dual readouts in both .0001” and 0,001 mm increments


•Sunnen Dial Bore Gage system provides quick, easy way to gage I.D’s on bores with a wide range of sizes and lengths
•Gages and setting fixtures work together for accurate, reliable results
•Digital models available to simplify data analysis for SPC use
•Unique size-setting fixture allows you to dial to the exact size in seconds
•Retractable gage head and adjustable centralizer allow easy “in-and-out” even with interrupted bores
•Shock shield protects the indicator against drift and movement caused by heat or rough handling.

40MM Diameter Gages Series 350



Brand Name Brown & Sharpe
System of Measurement Inch
Material Type Stainless Steel
Manufacturer Series Number Compac Dial Gauge Indicator
Stem Outside Diameter 0.315  inches
Thread Style M2.5
UNSPSC Code 41111630

browne and sharpe_small

Digimatic Height Gage

Digimatic Height Gage
SERIES 192 — Standard Type with SPC Data Output


Digimatic Height Gage
SERIES 192 — Standard Type with SPC Data Output



DIGI-CHEK 258 Series

DIGI-CHEK 258 Series

digi-chek-heigh gauges

The 258 series features satin chrome scales mounted beside the gage block column for quick reference to nearest 1″ or 25 mm reading. The digital readout reads in .001″ or .01 mm while the micrometer head reads to .0001″ or .002 mm. Both over and under heights can be checked from the gage blocks in a single setting. Readings can be taken from either left, center or right of the gage block column. The gage itself is mounted in a heavily flanged frame for stability while the base has three-point hardened bearing pads making the unit virtually tip-proof. For increased height capacity a 10″ riser block is available. English 258 series height gages are available in 12″, 18″ and 24″ sizes. Metric 258 series height gages are available in 300 mm, 400 mm and 600 mm sizes. Certificates of Calibration are available at extra cost, as are finished wooden storage cases